Kentucky collector Daryl Padgett knew immediately, more than three
years ago, that the error 1893 Barber dime he'd just obtained from an
acquaintance had some value, but he didn’t pursue learning how much
value until recently.
Padgett said he purchased the error coin from an acquaintance at a
local bingo hall. The man was looking for extra cash to finish out his
evening of playing bingo.
The $75 Padgett paid was for several coins — the error dime along
with a small number of other coins, some foreign, some silver, Padgett
said. Padgett said he told the acquaintance that if he ever sold the
error piece, he would pay the man an additional $50, which he since has.
Padgett said he recently came across a Coin World
advertisement by Jon Sullivan from Sullivan Numismatics in Charleston,
S.C., seeking U.S. Mint error coins. Padgett submitted the coin to
Sullivan, who in turn shipped the coin off to Professional Coin
Grading Service for grading and encapsulation.
PCGS certified the coin as an obverse die cap with a full obverse
brockage on its reverse and graded the piece About Uncirculated 55.
According to Sullivan, Padgett was compensated an undisclosed sum
for the error coin, one of fewer than 10 known die cap errors for the
Barber dime series.
Sullivan subsequently sold the coin to error coin dealer Mike Byers
from Mike Byers Inc. in Las Vegas, Nev., who is offering the coin for
$25,000, both on his website and on eBay.
“It's unique since the reverse is an incuse brockage of the obverse,
creating counterbrockages,” Byers said.
The obverse of the 1893 Barber dime error appears deeply dished,
from having become stuck on the upper hammer die. The force of the
striking pressure when struck against another coin, and possibly a
subsequent planchet, caused the .900 fine silver piece to split, from
between and just above the T and E in UNITED out through the rim.
On the reverse, a brockage image of the obverse of the coin this
piece was struck against appears. A brockage is a mirror duplicate of
the original design, but with all details reversed and incuse.
How it's made
Error experts who have seen the coin or detailed photos of it differ
slightly on what to call the coin, as they are in general agreement as
to how the error initially occurred but not in complete agreement on
what happened immediately afterward.
According to Sullivan, the die cap dime error occurred after a
planchet was fed into the striking chamber, struck, and failed to be
ejected. “Then this Barber dime die cap’s planchet was fed on top of
that struck coin that was still resting on top of the reverse die, and
struck into it, created a mirror brockage of the obverse on the
reverse side, and also causing the coin to stick to the obverse
(hammer) die,” Sullivan explained by email Aug. 24.
“The bottom coin was then ejected from the striking chamber, but
this coin, which had stuck to the obverse die, was struck into at
least two or three incoming planchets before it finally fell off the
obverse die, and was itself ejected from the striking chamber,”
Mike Diamond, another error expert and author of Coin World’s
Collectors’ Clearinghouse column, agrees on the way the error
occurred, writing after viewing photos of the coin: “Clearly the coin
represents a planchet that was fed on top of a previously-struck coin
that was itself struck normally. Given the considerable expansion seen
in the top coin, it’s likely both coins were then struck out-of-collar.”
Diamond adds, “I can’t say for certain that there was more than one
strike involved. However, what appears to be a semi-circular 'strike
line’ in the obverse slide zone halfway between the peripheral letters
and the upturned edge of the coin may indicate the presence of a
Diamond disagrees with one description of the coin.
“By itself, the presence of cupping is not a reliable indicator of a
die cap or multiple strikes. It’s normal in the course of a single
strike for the periphery of a coin to curl toward the hammer die when
it’s struck on top of another coin or planchet, especially when both
coins are struck out-of-collar.
“I see no evidence that this coin ever functioned as a die cap. In
other words, I see no evidence that a fresh planchet was fed beneath
the brockage generated by the first strike. If that had been the case,
then the central design would be much more expanded, distorted, and
indistinct. Instead, the bust of LIBERTY is still sharply defined and
only slightly more expanded than the peripheral letters. This is to be
expected, as the center of the design remained beneath the hammer die
throughout the downstroke and received the full force of the strike.
Peripheral elements 'squirted out’ from beneath the hammer die during
the downstroke and didn't receive the full impact.
“There’ one other reason I’m skeptical about the die cap diagnosis,”
Diamond added. “If the brockaged coin — already cupped from the first
strike — had struck another planchet, you might expect to see a more
sharply defined transition between the wall and the floor. But what
you see is a smooth transition from the upturned portion of reverse
face to the horizontal portion.
“If I were describing the coin, I’d opt for a more conservative
interpretation: a cupped broadstrike with a full, centered,
first-strike brockage of the obverse design on the reverse face,”
Diamond adds, “It’s certainly an eye-catching error.”
More from CoinWorld.com:
did they come from and why do they exist?: Shady stories for U.S. coins
Uncirculated 2015-W Native American dollar in 2015 American $1
Coin and Currency set
collecting Coronet gold $5 half eagles: Q. David Bowers
the modern world coin third-party-graded market is growing
of £1.3 million Anglo-Saxon coin hoard discovered in 2014 going on
display: Coin World Buzz
Keep up with all of CoinWorld.com's news and insights by
up for our free eNewsletters,
liking us on Facebook
us on Twitter
. We're also on