Watch what you're doing

Preserving Collectibles
Published : 03/13/14
Text Size

In my last column (Dec. 30, 2013, issue of Coin World), I reported that recent conservation research showed that using silver dips to remove toning (i.e., silver sulfide) increases the likelihood of recorroding in the future. Based on their results, I cannot recommend their use. This month, I will review the alternative cleaning techniques.

Before you reach for a cleaning product, lightly wipe the surface of the coin with a soft, clean cloth or makeup sponge. If the layer of silver sulfide is in its early stages, it can be removed this way.

This technique works best with coins with a smooth surface as the toning is less likely to adhere to a smooth surface than to a rough one.

Galvanic cleaning

Galvanic cleaning entails immersing a coin and a piece of aluminum foil in a dilute solution of baking soda (sodium bicarbonate) or washing soda (sodium carbonate) in water. This technique works by setting up a galvanic cell where the aluminum, being the less noble, is the anode and the silver coin the cathode.

The solution of baking or washing soda provides the electrolyte allowing the two metals to interact.

During the reaction, the aluminum foil is corroded and a byproduct is hydrogen gas. The hydrogen gas reacts with the silver sulfide to chemically reduce it back to silver. It is crucial that the silver and the aluminum be in constant contact throughout the treatment. If not, the galvanic action could act to preferentially corrode the copper in the coin’s silver alloy.

Commercial silver cleaning products that come with an “electrolytic cleaning plate” exploit exactly the same principals. The metal plates provided are usually zinc or a zinc alloy and work exactly the same as aluminum foil and baking or washing soda in water.

The primary downside to this technique is aesthetic. The conversion of silver sulfide to silver produces a form of silver that is referred to as “mossy” silver.

Mossy silver is rough and spongy, tends to tarnish rapidly and looks dull and lackluster. Many who clean silver using this technique to polish the silver with an abrasive technique to improve the look.

You are signed in as:null
No comments yet