Eighteen years after the U.S. Mint retired a Proof 1995-P Atlanta
Centennial Olympics silver dollar die from production, the private
Regency Mint in Orem, Utah, resurrected its use to strike medals.
The United States Mint sold canceled dies from the Atlanta
Olympics program as collector products for $49 each in 1997. The
privately issued medals are struck with one of those canceled silver
dollar obverse dies and a new, medallic reverse die.
The private mint is offering the medals in three-piece,
Each of the medals is 38.8 millimeters in diameter. Offered are a
1-ounce .999 fine silver version, and two ringed-bimetallic pieces
each bearing a 30-millimeter, half-ounce .999 fine silver core within
an outer ring made of either brass or copper.
The medals have a prooflike finish.
Private minter Kelly Finnegan conceived of the medals. Finnegan
said Sept. 24 that he has wanted for some time to produce a
commemorative medal using one of the 2,833 X-canceled Olympic
commemorative coin dies sold by the Mint, but he was only recently
able to acquire a suitable example in an eBay auction.
Involvement in private mints
Finnegan was in a strong position to make the idea reality once he
had a suitable coin die. He holds connections to two private mints, as
owner of the Private Penny Press and as an employee of the Regency Mint.
Finnegan said the press at his Penny Press Mint was not powerful
enough to strike a commemorative medal, so he pitched the idea to his
employer, Regency Mint, where he works in multiple facets of sales and production.
In addition to striking the medals, Regency Mint is selling the
medals through a subsidiary, Quality Silver Bullion. The three-piece
medal sets are being offered on eBay under the user name
“qualitysilverbullion” and on the QualitySilverBullion.com website.
Medal production has been limited to 100 serially numbered sets,
with the serial number appearing on the reverse of each medal.
Finnegan said once sets 2 through 100 are sold, Regency will offer
set No. 1 in a package along with the U.S. Mint obverse die and the
to-be-canceled Regency Mint reverse die.
He added, “I am trying to bring the concept of bimetallic medals
into [the Regency Mint] product line, so I wanted to do the brass and
copper pieces as bimetallic medals with silver, rather than doing the
usually seen set of silver, brass and copper.”
Finnegan said he searched to acquire an example of a dollar
obverse die so as not to run into any possible problems with the
United States Mint by striking medals with a former coin reverse die
bearing a denomination.
“There aren’t any legal issues with striking the pieces,” Finnegan
said. “The dies were cancelled and sold by the U.S. Mint. They [the
medals] are not issued as official U.S. government issues. They do not
purport to have a redeemable value in U.S. currency.”
The U.S. Mint die Finnegan obtained on eBay bears the design for
the Proof 1995-P Track and Field silver dollar. The die was one of 220
such Proof dies bearing the Track and Field design that the United
States Mint offered to collectors from the bureau’s holiday catalog.
The Mint legal staff and Treasury Department officials cleared the
way for the sales in 1997. Each die sold was canceled with a deeply
incised X-pattern across its face; the defacement was intended to
prevent the dies from being used to strike counterfeit coins while at
the same retaining most of the design elements.
Some in the numismatic community, especially error coin dealers,
opposed the sales of the dies. Some error specialists in the dealer
community warned of the possibility of the dies being used to strike
counterfeit error coins since significant portions of the designs
remained intact on the die faces.
The die offerings included $5 gold half eagle and silver dollar
obverse dies, with no half dollar dies included.
Sales of the Track and Field obverse die were second only to sales
of the 1995-P Clasped Hands silver dollar; 375 Proof obverse dies were
sold with that design.
Finnegan’s U.S. Mint dollar die was placed into service at the
Philadelphia Mint on Sept. 15, 1995, and removed after 1,960 strikes
because of a die defect known as “starburst.”
“Starburst,” according to U.S. Mint officials, is caused by
abrasive particles that accumulate and are carried by the die. During
the striking process, the particles score and scratch the die while
moving outward from a central point in the direction of the metal
flow. These particles and scratches translate to raised areas on the
Because the Proof Olympic coins received two strikes per coin, it
is likely Finnegan’s coin produced at least 980 coins before
retirement because of the starburst problem.
Finnegan said the medals were struck on an Italian-made MDM
coinage press striking at a pressure of 600 kilograms per square centimeter.
The silver medals were each struck twice to bring up the relief.
The ringed-bimetallic medals each received one strike from the pair of
dies, with the silver insert already in place in the outer ring,
Finnegan said. Each planchet for all three medals was centered by
hand, he said.
The obverse of each medal has a raised X-cancel, imparted by the
U.S. Mint die.
The Regency Mint reverse design is inscribed around ONE OF 100
PIECES STRUCK ON CANCELLED U.S. MINT DOLLAR DIE.
Centered in the middle of the reverse is 1996 / ATLANTA /
CENTENNIAL / GAMES, flanked by single five-pointed stars. The serial
number appears below. Below the serial number is .999 FINE SILVER.
Regency Mint’s RM hallmark appears in the left field.
The silver medals are approximately 3.2 millimeters at the rim;
the bimetallic medals, 2.4 millimeters.
Same reverse used
“I purposely engraved the reverse die to say that the piece
contained ‘.999 Fine Silver,’ without mentioning the weight so that
the same reverse could be used for all three medals in the set,”
Finnegan said. “The weights are listed on the certificates of analysis
that come with the medals. Regency makes a 1/2 troy ounce silver
bullion medal, so one of those blanks was used for the center. Then
copper and brass rings were created to match the thickness of the
half-ounce silver planchets used to make the bimetallic medals.
“Being accurate with the silver content in the bimetallic medals
was more important than making the thicknesses consistent. The
striking force was adjusted accordingly for the medal types,” he said. ■