Elements of the field and devices of the upcoming Enhanced
Uncirculated 2013-W American Eagle silver dollar will exhibit one of
three different finishes.
The Enhanced Uncirculated 2013-W American Eagle silver dollar is
to be included later this year as part of a two-coin silver American
Eagle set to be offered to U.S. Mint customers. The set will celebrate
the 75th anniversary of what is now known as the West Point Mint.
The Enhanced Uncirculated coin will be available only in the
The set was referred to as the 2013 American Eagle West Point
Two-Coin Silver set when U.S. Mint officials announced the new product
option Jan. 15. The name is subject to change.
The other coin in the set will be a Reverse Proof 2013-W American
Eagle silver dollar, which will also be available only in the set.
The surface finishes of a Reverse Proof coin, mirror-finished
devices and frosted fields, are reversed from those of a traditional
Proof coin, which has mirror-like fields and frosted devices for a
The U.S. Mint expects to begin accepting orders for the 2013 set
sometime this spring. Pricing and other information are expected prior
to its release.
Not first time
The Enhanced Uncirculated silver American Eagle is not the first
U.S. Mint experiment with multiple finishes on one numismatic item.
Mint spokesman Michael White said that more than one finish was
used on elements of the Uncirculated 2012-P Hawai‘i Volcanoes National
Park 3-inch, 5-ounce, .999 fine silver quarter dollar.
White said multiple finishes were also used on elements of the
1-ounce .999 fine silver September 11 medals produced at the West
Point Mint and Philadelphia Mint in 2011 and 2012.
For the Enhanced Uncirculated 2013-W American Eagle, the different
finishes are being executed through the use of die auto polishing and
“The dies are first auto-polished using a horsehair brush and then
laser frosted using a heavy or light laser frost application,”
according to Mint responses to questions posed by Coin World. “The
result is that the dies have three distinct finishes (heavy frost,
light frost, brilliant polish). Finally, the dies are given a PVD
coating to increase die life.”
PVD, or physical vapor deposition, is a process that involves
evaporation and deposition of a material. The thin chrome coating
applied by the Mint through the PVD technique known as “sputtering”
helps to protect the dies during striking, by adding lubricity that
reduces friction that could cause die degradation, according to U.S.
The PVD process is more environmentally safe than the previous
hexovalent chrome process, according to the Mint.
The fields on the Enhanced Uncirculated 2013-W American Eagle’s
obverse and reverse will have the light frosted finish. Each side will
also have two other finishes.
On the obverse of the coin, a brilliant polished finish was
executed on the mountains, what would be the red stripes and blue
field of the United States flag, the date and Liberty’s sandals. The
remaining elements and lettering on the obverse have the standard
heavy frosted finish.
On the reverse, the ribbon in the eagle’s beak, the arrows and the
oak branch all have a brilliant polished finish. The lettering and
other design elements on the reverse have the heavy frosted finish.
White said at this time it has not been determined whether the
“Enhanced Uncirculated” superlative will become the norm for
Mint-marked, non-Proof silver American Eagles, replacing the standard,
burnished Uncirculated version.
The standard, burnished Uncirculated 2013-W version is scheduled
to go on sale from the Mint on May 28.
The Enhanced Uncirculated silver American Eagles are currently
being struck on Graebener GMP 360 presses, with the dies oriented
vertically. The hammer die represents the obverse and the anvil die
the reverse — the same orientation as other U.S. coins.
Not a Proof
While the coin has some polished, reflective surfaces similar to
those found on Proof coins, and is struck multiple times rather than
once, it is not a Proof piece, according to the Mint.
The Enhanced Uncirculated coins are being struck three times on
specially burnished planchets, with a striking pressure of 210 metric
tons per strike to bring up design details.
Since most of the U.S. Mint’s premium numismatic coins, both
Uncirculated and Proof, are struck multiple times using specially
prepared dies, the number of strikes is not necessarily an indicator
of what distinguishes a Proof coin from an Uncirculated coin.
The polishing technique used for the dies for the Enhanced
Uncirculated coin also differs from the technique used for polishing
“The horsehair brush automated process creates a reflective
surface of artwork elements, but cannot achieve a smoothness of the
felt pad,” according to the Mint’s response to Coin World. “The felt
pad cannot polish relief and is generally used to polish the field of
a Proof die, resulting in a mirror-like finish. The auto polishing
with a horsehair brush results in a brilliant uncirculated finish. The
dies then go through a laser frosting process to achieve a heavy laser
frost or a light laser frost in areas as described above.”
Planchet processing also differs.
Before striking, the planchets for the Enhanced Uncirculated coin
are burnished using steel shot, soap and water.
Proof coins are produced on planchets polished to a uniform
The West Point Mint opened as a silver bullion depository in 1937.
It first struck coins in 1974. The facility was elevated to full Mint
status in 1988.
To date, the United States Mint has struck American Eagle silver
coins in the following finishes:
➤ Uncirculated, used to describe bullion coin versions from 1986
to 2006, when the term “Uncirculated” was dropped by the Mint in
promoting the bullion pieces.
➤ Proof, used from 1986 to 2008, and from 2010 to date.
➤ Reverse Proof, used first in 2006 and periodically since then.
➤ Uncirculated, for collector versions, introduced in 2006 and
used periodically since (called “Burnished Uncirculated” by collectors
➤ Enhanced Uncirculated. ■