This 2001-D Lincoln cent received a very weak second strike. The image of Lincoln produced by the second strike is vertically oriented in the photo.
Dies are much harder than coin metal and they are applied with many tons of pressure.
In most double strikes, evidence of a first strike is largely or completely erased when a second strike is delivered, provided that there is direct contact between the die face and the coin. The last provision is important, because anything that softens the impact of a die will tend to aid the preservation of first-strike details. This could be an intervening planchet, the thin floor of a die cap or even a thick layer of “grease.”
Even when there is direct die contact, there are times when first-strike details survive the impact to an impressive degree. Such coins are highly prized by collectors because of their rarity and the resulting eye-catching jumble of intermingled design elements.
First-strike elements can resist obliteration through several different mechanisms. One of the most common is the delivery of a weak second strike. The illustrated 2001-D Lincoln cent was double struck in-collar, with an approximate 45 degree clockwise rotation of the coin between strikes.
The first strike was produced under normal striking pressure (approximately 38 tons per square inch). The second strike was delivered with far less force. As a result, all of the first strike remains intact, though slightly flattened here and there. The second strike is far less complete.
The weak second strike could have been caused by insufficient ram pressure (the tonnage delivered to a planchet of normal thickness). A more likely cause is insufficient die approximation (excessive minimum die clearance). During the second strike, something prevented the two dies from approaching each other closely enough to deliver a forceful strike.
Even when a second strike is forcefully delivered, considerable amounts of the first strike can persist under unusual circumstances. In the illustrated 1980-D Lincoln cent, virtually all topographical evidence of the first strike was obliterated. And yet most of the first strike is still visible, but in the form of a surface film afterimage.
Sometimes a planchet arrives in the striking chamber covered by a thin film of grime or oil. In other cases, an oily die can transfer a thin film to a coin with the first strike. In either case, the raised design elements of the first strike are covered by a greasy film. When the coin shifts or rotates, this greasy film preserves the shape of the first strike elements, even though the latter are physically erased.
A surface film afterimage can be pale (as in this example) or dark or can take the form of a dark outline that preserves the shape of the original element. Often a surface film afterimage appears as an area of heightened reflectivity; this will often appear dark, just as the mirror field of a Proof coin will appear dark in photographs.
The illustrated 1999-D Jefferson 5-cent coin shows a strong, off-center second strike that is die-struck on both faces. Surprisingly, the word pluribus has resisted obliteration. The outline of each letter is preserved by an unusual coarsening of the surrounding field. While metal crystallites usually fuse under compressive or bending stresses (producing a matte texture), seldom does this occur to any great extent at the margins of design elements. But here, the compression of the first-strike letters and the surrounding metal generated this coarsened, slightly recessed surface. The obverse face does not show this effect.
On rare occasions, copper-plated zinc cents develop a split plating afterimage as seen on this undated cent with a flipover double strike. The copper plating split at the margins of the letters erica when the die crushed them on the second strike. The second strike on this coin was particularly strong, as this is also a uniface strike (struck against a planchet on the opposite face). However, most uniface second strikes do not show a split plating afterimage on the die-struck face.
Coin World’s Collectors’ Clearinghouse department does not accept coins or other items for examination without prior permission from News Editor William T. Gibbs. Materials sent to Clearinghouse without prior permission will be returned unexamined. Please address all Clearinghouse inquiries to firstname.lastname@example.org or to (800) 673-8311, Ext. 172.